Steve Saunders Goldwing Forums banner
Status
Not open for further replies.

Radio won't work in key ACC position

4K views 4 replies 3 participants last post by  Rally-Gator 
#1 ·
imported post

Radio works fine in ON key position. But does not play in the ACCor PARK position.

In ON position, headlights and all are on. PARK position has tail lights on.

When you just want to listen to the radio, without the lights on etc, the ACC position should be the answer. The manual says the radio should work in the ON, ACC and PARK key positions. Mine does not work in the the ACC or the PARK position.

Any idea's??
 
#4 ·
imported post

FitzAl: no CB or intercom power on anything but the ON position

Rally-Gator: It is the OEM radio and nothing (wiring wise) appears to have been modified.
 
#5 ·
imported post

It sounds like the ignition switch may have a faulty acc position. You will have to trace the wiring and check it with a trouble light. The radio should have 2 power leads, one will be hot all the time and the other should switch with the ignition. If it only has power on the switched lead in the on position then most likely your ignition switch is defective.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top