The rear end only holds 4.7 oz of 80-90 HYPOID gear lube.
Ck it on the centerstand- must be level with the bottom of filler plug opening.
Ck it before draining- lets see if thats half your problem
Does it have a new rear tire? Excess moly70 (or higher) applied to the spline shaft can get pushed out.
There are 3 tiny orings inside the hub/spline/moly area- assembly, often overlooked at tire change!
Welcome to the forum , help is here on every question you can come up with!
edit: correct capacity to 4.7 oz. and Level with bottom of fill opeing
Certified Slacker is suffering under the delusion of being an expert... We need more Voltage! IGOR- throw the 3rd switch!!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Not the 3rd switch Master!!
Last edited by Aloha Tom; 01-11-2017 at 06:42 PM.