Drove out to Nashville, about 150 miles, for a Honda Del Sol at Pull-A-Part had it listed but had been there for about a month.
Luck was with me & the rear section of the body was there W/O the tail lights.
So using my Batt. Saw Off the rear fenders started to come off.
Not 15 mins later this guy showed up all upset because he needed the whole rear section for his car.
Lucky me again!
Plan is to use them on the next Trike body & hopefully make a new rear section of the mold using the front fender section. This way will be able to offer the fiberglass Trike body with or without tail lights.
The metal parts cost me about $20.00 & the tail light units came off of eBay for $75.00.
They are after market design, but stock lights will also fit.
Will be starting a new post on the next Trike build soon.
Right now just collecting misc. parts.
The bumper was gone so will need to form the bottom section.
Will weld all the parts together & body work them.
Then make a new mold & one release of the L & R side to mount to Trike body.