| Author | Post |
|---|
gaz1200
Member
back to top
|
Posted: Fri May 16th, 2008 02:41 am | 1st Post |
|
| Ok, I developed a problem. Today was the first ride out sice winter tead down of the bike. Now, my spedo don't work and my self canceling turn signals don't work. I added turn signals on the trunk of the bike. Would that affect it? I don't know why the spedo isn't working. I added rotor covers and think I got the cable in right. Would it not work if I added roter covers and didn't have the spacer? The bike is a 1986 GL1200 interstate. Any help is appricated. Thanks in advance, Dave.
____________________
I am not Dave in the ditch.
Currently Own: 1986 Goldwing 1200 Interstate
Past bikes I have owned: 1988 Honda Shadow VT800C, 1984 Suzuki GS 350A.
|
exavid
Top Poster
back to top
|
Posted: Fri May 16th, 2008 04:16 am | 2nd Post |
|
| Your turn signal requires a signal from the speedometer for the canceller to work. If the speedo doesn't work the canceller won't either. I'd double check the cable at the sender end. It could be the cable isn't installed right into the sender or the sender itself may be damaged or mis-installed.
____________________
If you can't ride, fly or sail it, why bother?
Paul W. 1993 Aspencade 1982 Aspencade
|
andy1800
Very Active Member
back to top
|
Posted: Mon May 19th, 2008 05:58 pm | 3rd Post |
|
| Sounds like the cable isn't sitting in the slot properly. No speedo cable = no self cancellers as well.
|
Current time is 08:12 pm | |
|
|
|
