Wanted: Hangar bolt - For Sale/Wanted Forum - Steve Saunders Goldwing Forums

Not logged in - Login | Register

More of the free keyrings and buttons posted out on Monday, September 29th. You can check your order status HERE. Members who missed this can get details on the KEYRINGS THREAD in the General Discussion forum, and can claim their goodies using the REQUEST FORM

Steve Saunders Goldwing Forums > Steve Saunders Goldwing Forums > For Sale/Wanted Forum > Wanted: Hangar bolt

Wanted: Hangar bolt

Moderated by: wingnut, WEXY, tanygaer, redbaron, Patch, mikef, MDKramer, AZgl1500

New Topic

Printer Friendly

Author

Post

Sprat
Member

Joined:	Sat Jun 7th, 2008
Location:	Trenton, Ontario Canada
Posts:	6
Goldwing:	GL1200 Aspencade
Mileage:
Status:	Offline
Mana:

Posted: Sat Jun 28th, 2008 04:25 pm

1^st Post

Quote

hey guys... About the last thing I need to get my 1985 Aspy on the road is the hangar bolt.. (its a discontinued part, I know its just a bolt, but I cant find one)

Part # 90152-MG9-680 - approx 14" long.... 12mm bolt..

Its the bolt that holds on the floor boards/ engine guard and goes under through the bottom of the engine..

thanks..

Cheers..

Sprat

Last edited on Sat Jun 28th, 2008 04:27 pm by Sprat

keithg64
Very Active Member

Joined:	Mon Apr 3rd, 2006
Location:	Geneseo, Illinois USA
Posts:	631
Goldwing:	GL1100 Interstate
Mileage:	79,000 and counting
Status:	Offline
Mana:

Posted: Sun Jun 29th, 2008 03:28 am

2^nd Post

Quote

You could use 7/16 diameter allthread that you could get at your local hardware store.

____________________
It's not what you buy, it's what you build.

1981 Goldwing GL1100

CMA member #125870

exavid
Top Poster

Joined:	Sun Sep 12th, 2004
Location:	Tacoma, County Of Franklin Pierce, Washington USA
Posts:	23811
Goldwing:	GL1000, GL1100 Aspencade, GL1500 Aspencade
Mileage:	Quite a bit
Status:	Offline
Mana:

Posted: Sun Jun 29th, 2008 04:54 am

3^rd Post

Quote

1/2" will fit in a '70 so I'd expect it would fit in the 1100 and 1200.

____________________
If you can't ride, fly or sail it, why bother?
Paul W. 1993 Aspencade 1982 Aspencade

Sprat
Member

Joined:	Sat Jun 7th, 2008
Location:	Trenton, Ontario Canada
Posts:	6
Goldwing:	GL1200 Aspencade
Mileage:
Status:	Offline
Mana:

Posted: Sun Jun 29th, 2008 10:40 am

4^th Post

Quote

Yes, I guess this isn't a show stopper as an threaded run will work. I was thinking a 7/16" with a grade 8 hardness. But I'll try a 1/2" to see if it will fit, its pretty tight on a 12mm though, so not sure. I would rather have the correct piece though, if possible. But hell or high-water, she'll be on the road soon..

Thanks guys

AVA AUTO TECH
Very Active Member

Joined:	Sat Aug 19th, 2006
Location:	Brampton, Ontario Canada
Posts:	636
Goldwing:	GL1200 Aspencade
Mileage:	52,000 miles
Status:	Offline
Mana:

Posted: Sun Jun 29th, 2008 12:03 pm

5^th Post

Quote

Hello Sprat. If you can give me the right size in metric I will call my Bolts pluse guy tomorow. Even though its one bolt he will get it for me. I'm not far from you and will ride out to you with it. :waving:

____________________
Tony---86 ASPENCADE--- PEARL-MARLIN BLUE--- HONEST EFFORT EQUALS RESULTS. LETS RIDE

exavid
Top Poster

Joined:	Sun Sep 12th, 2004
Location:	Tacoma, County Of Franklin Pierce, Washington USA
Posts:	23811
Goldwing:	GL1000, GL1100 Aspencade, GL1500 Aspencade
Mileage:	Quite a bit
Status:	Offline
Mana:

Posted: Sun Jun 29th, 2008 04:25 pm

6^th Post

Quote

I hope you get the bolt you're looking for. If not I tried a 1/2" all thread and it fit both a 1000 and 1100 in the shop so it should fit a 1200.

____________________
If you can't ride, fly or sail it, why bother?
Paul W. 1993 Aspencade 1982 Aspencade

Sprat
Member

Joined:	Sat Jun 7th, 2008
Location:	Trenton, Ontario Canada
Posts:	6
Goldwing:	GL1200 Aspencade
Mileage:
Status:	Offline
Mana:

Posted: Tue Jul 1st, 2008 04:51 pm

7^th Post

Quote

wow.. I'll have to find it and measure up..

thanks

Cal-D
Active Member

Joined:	Wed Feb 7th, 2007
Location:	Dartmouth, Nova Scotia Canada
Posts:	234
Goldwing:	GL1800
Mileage:
Status:	Offline
Mana:

Posted: Thu Jul 3rd, 2008 04:01 am

8^th Post

Quote

Sprat
I have one from an 82, if it fits you can have it for postage.

PM me if you want it

____________________
"Have Wing Will Travel"

Sprat
Member

Joined:	Sat Jun 7th, 2008
Location:	Trenton, Ontario Canada
Posts:	6
Goldwing:	GL1200 Aspencade
Mileage:
Status:	Offline
Mana:

Posted: Thu Jul 3rd, 2008 07:05 pm

9^th Post

Quote

Coool...

I'll check the manual tonight to see if its the same..

thanks..

Last edited on Thu Jul 3rd, 2008 07:07 pm by Sprat

Sprat
Member

Joined:	Sat Jun 7th, 2008
Location:	Trenton, Ontario Canada
Posts:	6
Goldwing:	GL1200 Aspencade
Mileage:
Status:	Offline
Mana:

Posted: Fri Jul 4th, 2008 11:53 pm

10^th Post

Quote

Hey All;
I'm happy to report that a 1/2" allthread will fit.
It only took me about 1.5 hours. And the second time I did it (correctly) only took about 45 minutes. (I racked up the end on the first go, and couldn't get the nut on, good thing it comes in 3' lengths)The spacers for the floor boards had to be threaded, but no big deal. (I didnt want to search for a 1/2 drill bit.)
Thanks to all for your offers and ideas..
Cheers..

Current time is 03:01 pm