| Author | Post |
|---|
basstracker
Member
back to top
|
Posted: Mon Jul 14th, 2008 03:22 am | 1st Post |
|
| I need the bracket that holds the left mirror on.
|
redneck
Senior Member
back to top
|
Posted: Thu Jul 17th, 2008 12:07 pm | 2nd Post |
|
| do you have the right side bracket off? if you can post a picture off so can compare and confirm what i have, i took a pair of brackets off a damaged fairing thinking they would fit mine, they wouldnt fit, they are in two pieces, the bit that goes inside the fairing and the piece that holds the mirror on, post a piccy
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
redneck
Senior Member
back to top
|
Posted: Thu Jul 17th, 2008 12:13 pm | 3rd Post |
|
| are yours like this Attachment: 100_1151.JPG (Downloaded 52 times)
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
basstracker
Member
back to top
|
Posted: Sat Jul 19th, 2008 02:10 am | 4th Post |
|
| Thanks for the reply. The guy i got it from said it fell over an broke the brackett so he took off the mirrors an put reg ones that screw on the handle bars.The only one i have is on the inside.I think it looks like the one on the left side of your piture.Does it go on the inside or out side of the fairing?
|
redneck
Senior Member
back to top
|
Posted: Sat Jul 19th, 2008 07:04 am | 5th Post |
|
| my 86 aspy, only has a bracket on the inside of the fairing only, the brackets in the photo wont fit my mirrors, i have seen two types of mirrors that fit the 1200, i took the bracket off a smashed 1200 fairing and the mirrors wasnt attached, the brackets are in two pieces for each side and are handed, left and right, if you take your other mirror off you will see if you have the bracket, if its not there you dont need it the ones ive got, you have to take off the speaker grille(s) and take out the speaker(s) to gain access the bracket inside the fairing
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
basstracker
Member
back to top
|
Posted: Mon Jul 21st, 2008 02:03 am | 6th Post |
|
| He already took the mirror off. theres only one bracket on each side but i cant get the mirrors to fit.I think he got differnt mirrors,The bolt holes just wont line up.it might need the brakets you have?The braket on the mirror has 4 holes in it.
|
redneck
Senior Member
back to top
|
Posted: Mon Jul 21st, 2008 06:54 am | 7th Post |
|
| which does your mirror look like Attachment: 1200mirror.jpg (Downloaded 24 times)
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
redneck
Senior Member
back to top
|
Posted: Mon Jul 21st, 2008 06:55 am | 8th Post |
|
| or these Attachment: 1200mirror1.jpg (Downloaded 22 times)
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
redneck
Senior Member
back to top
|
Posted: Mon Jul 21st, 2008 07:00 am | 9th Post |
|
if the brackets ive got are the ones you need, you can have them for free, but you pay for the postage, mirrors can be a pain in the a$$ to fit
pm me your address and i'll ship them out to you
Last edited on Mon Jul 21st, 2008 07:02 am by redneck
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
basstracker
Member
back to top
|
Posted: Tue Jul 22nd, 2008 03:09 am | 10th Post |
|
| My mirrors are like the ones in the # 2 picture.i can get one bolt started but the other one likes just a hair lineing up.Do you think i could bend the brackett a little?
|
redneck
Senior Member
back to top
|
Posted: Tue Jul 22nd, 2008 06:02 am | 11th Post |
|
| the brackets i have are no good for your mirrors, it just could be that your bracket may be slightly bent, or you may be inserting the bolt at the wrong angle, loosly fit one bolt then try the other, you may also have a bad thread on one of the captive nuts on that particular bracket,or it could be a wrong thread pitch on the bolt your using, has the bike been on its side at some point
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
basstracker
Member
back to top
|
Posted: Thu Jul 24th, 2008 02:46 am | 12th Post |
|
| Thanks for your help,i finally got the right side on, it got late so ill do the left side tomorrow,i was lining the holes up wrong.
|
redneck
Senior Member
back to top
|
Posted: Thu Jul 24th, 2008 06:05 am | 13th Post |
|
 glad you got it sorted. like i said earlier. the mirrors can be a pain in the ass to put on, now you now that, the next time you have them off the easier they are to put back, happy winging
____________________
irlp node # 5386....MB7IAG
GØSVH........... call me sometime
1986 GL1200 INTERSTATE (adopted )....1986 GL1200 ASPENCADE
|
Current time is 02:32 pm
| |
|
