| 1975 to 1979 | Rate Topic |
| Moderators: redbaron, MDKramer, Flyone, AZgl1500 | Page: 1 2   |
|
||||||||||||||||||||||
| Author | Post |
| Posted: Wed Dec 16th, 2009 08:38 pm | 1st Post |
|
|
I have 9 parts bikes, most of the electrical wire connections are toast. But there are soo many other parts good, no reasonable offer turned down, you pay shipping on the part you need.
|
|||||||||||||||||||||
| Posted: Sun Dec 20th, 2009 08:32 pm | 2nd Post |
|
|
What do you have in the way of GL1000 chrome. Preferrably the side engine covers
____________________ Only bike I really wanted to ever own is GOLD. There are only two types of Goldwings Rolled Gold - Pretzels Old Gold - Polish Patriot Guard Rider - Let's Show Them The Respect They Deserve. http://www.nmpatriotguard.org http://www.patriotguard.org |
|||||||||||||||||||||||
| Posted: Mon Dec 21st, 2009 03:41 am | 3rd Post |
|
|
My engine covers are all aluminum. I did polish some up for my bike and they look better than chrome to me. ( Valve Covers )
|
|||||||||||||||||||||
| Posted: Mon Dec 21st, 2009 06:02 pm | 4th Post |
|
|
I need the front turn signals and rear fender. Do you have any and what kind of shape are they in?
|
|||||||||||||||||||||
| Posted: Mon Dec 21st, 2009 06:47 pm | 5th Post |
|
|
I have some turn sigs if Waldo doesn't. They are off an 80 1100. They are on the back but I believe they are the same as the front - nice shape. Last edited on Mon Dec 21st, 2009 06:49 pm by Pony Ruiz ____________________ 78 1000 naked - gone and almost forgotten. 80 1100 standard - down to the frame naked ready to pretty up 83 interstate - needs a little help -basically good - almost back on the road... "Never trust an enterprise that requires new clothes" H.D.Thoreau |
|||||||||||||||||||||
| Posted: Mon Dec 21st, 2009 09:54 pm | 6th Post |
|
|
I have a rear fender that on 1-10 scale, I'd say an 8, some rust where you can't see it under seat
|
|||||||||||||||||||||
| Posted: Wed Dec 23rd, 2009 01:22 pm | 7th Post |
|
|
Pony Ruiz wrote: I have some turn sigs if Waldo doesn't. They are off an 80 1100. Any way to find out if they'll fit a '78 ?
|
|||||||||||||||||||||
| Posted: Wed Dec 23rd, 2009 01:23 pm | 8th Post |
|
|
Waldo878 wrote: I have a rear fender that on 1-10 scale, I'd say an 8, some rust where you can't see it under seat I'm interested, let me know how much you want for it shipped.
|
|||||||||||||||||||||
| Posted: Wed Dec 23rd, 2009 02:59 pm | 9th Post |
|
|
These are not round at the base - kind of oval but not really. I thought earlier ones were round - as in tubeular at the base. need a pic?
____________________ 78 1000 naked - gone and almost forgotten. 80 1100 standard - down to the frame naked ready to pretty up 83 interstate - needs a little help -basically good - almost back on the road... "Never trust an enterprise that requires new clothes" H.D.Thoreau |
|||||||||||||||||||||
| Posted: Thu Dec 24th, 2009 05:17 am | 10th Post |
|
|
make an offer, I'm easy my number is 209 403 8344
|
|||||||||||||||||||||
| Posted: Tue Dec 29th, 2009 07:05 pm | 11th Post |
|
|
Pony Ruiz wrote: These are not round at the base - kind of oval but not really. Sure, a pic would help. thanks
|
|||||||||||||||||||||
| Posted: Tue Dec 29th, 2009 11:22 pm | 12th Post |
|
|
front attached to the headlight ear. second photo is the rear attached to the same ear  rear on the headlight ear  the headlight earthe thang which is the tang that holds the light on. stock rear has one too.  I thought they were exactly the same until i held them next to each other. the front is a little thicker, so when you put the rear on the front there is a reveal of the chrome ear at the base all the way around of about 1/8"
____________________ 78 1000 naked - gone and almost forgotten. 80 1100 standard - down to the frame naked ready to pretty up 83 interstate - needs a little help -basically good - almost back on the road... "Never trust an enterprise that requires new clothes" H.D.Thoreau |
|||||||||||||||||||||
| Posted: Sat Jan 2nd, 2010 02:23 am | 13th Post |
|
|
Hi..new member here. Would you by chance have a windshield floating about there in your parts piles that would fit my '79 Wing? Joe
____________________ I love work; I could sit and watch it forever! |
|||||||||||||||||||||
| Posted: Sat Jan 2nd, 2010 02:27 am | 14th Post |
|
|
What year is your GL1000? Are you looking for the round or rectangular lense signals? Joe  Last edited on Sat Jan 2nd, 2010 02:28 am by jmhondarider ____________________ I love work; I could sit and watch it forever! |
|||||||||||||||||||||
| Posted: Sat Jan 2nd, 2010 03:26 am | 15th Post |
|
|
All I have are full fairings over here
|
|||||||||||||||||||||
| Posted: Fri Jan 8th, 2010 06:58 pm | 16th Post |
|
|
Actually am looking for the screws for the left side of the (sitting on bike) timing belt covers for GL1000. Long story but when they found my bent rod in my 1975 they sent the various stuff back in boxes and I missing a few things. Got a 78 engine in now but it didn't have the screws in either. I would love a 1978 carb setup if you have one (I am more than willing to pay for the carb). Chris
____________________ Got my 1985 GL1200A on March 16th, 2010 and I love it. nofixedaddress @ gmail dot com |
|||||||||||||||||||||
| Posted: Sun Mar 14th, 2010 04:22 am | 17th Post |
|
|
I need a lower left side fork leg for my '79. Any luck? Thanks, Steve
|
|||||||||||||||||||||
| Posted: Sun Mar 14th, 2010 05:14 am | 18th Post |
|
|
Hi, Looking for a rear grab bar for my new to me 77 naked wing! Also, might be interested in a nice speedo for 77....Do you have a good gas tank?? I am sure there are more items, just can't remember any more at this time....thanks in advance! Joel
____________________ Several V65 and V45 Magna and Sabre's, KZ200, CB650SC, CM400A, KZ440, CB350F's, 94 Kaw Concours and finally a very nice 77 GL1000 with 47K!! |
|||||||||||||||||||||
| Posted: Sun Mar 14th, 2010 03:34 pm | 19th Post |
|
|
Any chance you have a set of 78 (or 79) carbs that aren't shot or too gummed up. If so what would price be with shipping?
____________________ Got my 1985 GL1200A on March 16th, 2010 and I love it. nofixedaddress @ gmail dot com |
|||||||||||||||||||||
| Posted: Sun Mar 14th, 2010 05:02 pm | 20th Post |
|
|
I'm looking for a Dyna CDI for my 76 GL1000. You wouldn't happen to have one available would you? And if so how much? Thanks
____________________ Don, 1976 GL1000 1977 GL1000 |
|||||||||||||||||||||||
| Current time is 11:52 pm | Page: 1 2 |
| Steve Saunders Goldwing Forums > Forums > For Sale/Wanted Forum > 1975 to 1979 | Top of Page |
Copyright © 2007-2008 Data 1 Systems
