Join Date: Nov 2010
Location: Banning, California, USA
I rebuilt my carbs. Bikes been sitting for 6 years. Runs great. Problem idle goes up and down 600 rpm. was lookin in the manual and it says to set the idle screws to 2 5/8 turns out I have them at 1 1/2 turns would this cause it to do that. The other thing is when I rev the engine it stays at 2000 rpm and very slowly come down and I mean very slowly. No I have not syn the carbs as of yet. Need to get some gauges. Thanks....... JD
1994 1500 Aspencade
Yeah it\'s a work in progress.....