getting started with the westgl 32dft scc - Steve Saunders Goldwing Forums

 
LinkBack Thread Tools
post #1 of 2 (permalink) Old 08-20-2015, 04:16 PM Thread Starter
Senior Member
 
Join Date: Apr 2012
Location: weston, Ontario, Canada
Posts: 504
getting started with the westgl 32dft scc

Quote:
Originally Posted by westgl View Post
I want to start off by saying that this was a collaborative effort,

I did not do this Alone.

And,

My Bike, is not the only Bike, that is Running Great Now, with this Exact or very Similar Single Carb Conversion setup.

This Single carb. Setup, is a Formula for success, out of the box success, with the 32DFT 2-barrel Progressive Carb. No Jetting at all, all i did was, remove the Elec. auto choke (It is Not needed) start the engine, and set the Idle to 1000 rpm, Then inspect for leaks, air up the tires and Go for a Ride
Weber 32 DFT (Same as)

Manifold Runner Kit - Type 3 & 4


typical throttle hookup parts, empi uni link kit


some folks say the 32dft runs great as is, other folk say runs rich at idle RPMs & needs tweaking

some folks say intake needs heat, others say naahh....
Quote:
Originally Posted by CaptainMidnight85 View Post
Aside from myself, none but one have put a coolant chamber on a Empi plenum to heat it as Tom directs.
...to each their own.
one big reason for varying results is folks who are interested in scc are often tinkerers by nature, and like to try different ways/approaches to intake manifold setups, here's easy

what is the best, easiest intake runners setup with the westgl scc

vids
a-z

vids of running bikes, tutorials etc

========================================


82, going over it

had a hog in there for a bit but basically,
back in the saddle after a ~ 24 year break,
at the time, had an oncoming made a left turn deal

Last edited by pdbro; 08-21-2015 at 08:02 PM.
pdbro is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 08-21-2015, 05:19 PM Thread Starter
Senior Member
 
Join Date: Apr 2012
Location: weston, Ontario, Canada
Posts: 504
changed the focus of this thread from

"pls post links to langdon based scc treads here"

to current title

82, going over it

had a hog in there for a bit but basically,
back in the saddle after a ~ 24 year break,
at the time, had an oncoming made a left turn deal
pdbro is offline  
Closed Thread

  Steve Saunders Goldwing Forums > Forums > Goldwing Technical Forum > Altered Induction

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Steve Saunders Goldwing Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Altered Induction or scc 101, pls add your input, ideas, relevant info & links pdbro Altered Induction 12 08-21-2015 01:14 PM
is the langdon carb good to go on all 3 early engine lines? pdbro Altered Induction 1 08-16-2015 01:35 PM
Fix this GL1000 motor or find another....? at Post #25, this went to a SCC thread spaceboy3000 Altered Induction 34 01-22-2014 02:19 PM
New Treads? Wingmaster Shamus General Motorcycle Discussion Forum 6 03-01-2013 08:26 PM
How to post links with a Mac using Safari dan filipi Test Forum 4 03-03-2007 12:00 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome