Steve Saunders Goldwing Forums

Steve Saunders Goldwing Forums (https://www.goldwingfacts.com/forums/)
-   Goldwing Technical Forum (https://www.goldwingfacts.com/forums/2-goldwing-technical-forum/)
-   -   GL1200 Audio/Intercom (https://www.goldwingfacts.com/forums/2-goldwing-technical-forum/342162-gl1200-audio-intercom.html)

owaace 02-26-2010 08:35 AM

imported post
 
Hello,



I am asking all of the electronic gurus for some help in my idea to add a cell phone connection into the Intercom system for my GL1200.



Here is my current setup. I have an Audiovox 100 FM modulator that is connected inline with my antenna from the Radio. The beauty of the Audiovox is that it blocks any incoming signal from the antenna and feeds its signal into the antenna so the radio provides a great sound just like you were listening to a very strong FM station.



My cell phone, which also plays mp3 music, is my aux music source for those ride into remote areas. Anyway the need thing about my cell is that if I get an incoming call, it stops the music, and automatically goes into phone mode. This combined with a headset mic/earphone gives me hands free communications.



I would like to wire the microphone/speakers from my helmet so that when the cell phone goes into phone mode, I could flip a switch and now the helmet mic provides input to the cell phone and not the intercom. There are some systems out there that do a similar job for the GL1500/GL1800 but not the GL1200.



Any suggestions would be appreciated.

Thanks,



Bike...and Dennis 02-26-2010 10:30 AM

imported post
 
J&M used to sell phone interfaces.

owaace 02-26-2010 11:51 AM

imported post
 
Dennis,



I looked at J&M and they are setup to only support GL1500/GL1800 bikes. Does anybody know if this would work for a GL1200?



I also am looking for a less expensive solution, but if I can find a solution will......



Thanks,

Brian

Bike...and Dennis 02-26-2010 12:11 PM

imported post
 
owaace wrote:
Quote:

I looked at J&M and they are setup to only support GL1500/GL1800 bikes.

Yeah, GL12s are now considered obsolete by the aftermarket companies.

nsjoe 02-26-2010 12:18 PM

imported post
 
try Kennedy. If they don's have it, they can probably make it.

http://www.cellset.com/motorcycleitems.html

If they don't have what you want, try emailing them:

[email protected]

Wayne 02-26-2010 12:54 PM

imported post
 
The J&M CFRG-390C is a universal interface and will work on anything that has 12V supply. It is just shown on a 1500 for display purposes. I had one on my 87 ASP.
http://www.sierra-mc.com/proddetail....d=JM-CFRG-390C

owaace 03-03-2010 04:11 PM

imported post
 
Thanks guys for the commerical options. If any one has a home-made one I would like to hear about that too.



Ride Safe!

jwhitmore44 03-04-2010 08:55 AM

imported post
 
I'll 2nd nsjoe recommendation on Kennedy. i haven't used their stuff but looking over their web site, they probably have the cleanest setup for what you want.

I tired wiring in a hand held CB to my intercom on my 84 aspy. I never could get the mic input to the radio setup correctly. GSMclean had did some playing with this and he has suggestions on matching or filtering transformers. Unless you are real handy with electronics and have access to electronic parts it's not worth the time to try an make a "less expensive" setup. If you want less expensive, go with and earbud set made for your phone and attache the mic piece to your existing boom or the inside chin bar on your helmet. :)


All times are GMT -5. The time now is 12:23 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.

 
For the best viewing experience please update your browser to Google Chrome