GL1200 Audio/Intercom - Steve Saunders Goldwing Forums

 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 02-26-2010, 08:35 AM Thread Starter
Junior Member
 
owaace's Avatar
 
Join Date: Jul 2008
Location: Owatonna, Minnesota, USA
Posts: 4
Post imported post

Hello,



I am asking all of the electronic gurus for some help in my idea to add a cell phone connection into the Intercom system for my GL1200.



Here is my current setup. I have an Audiovox 100 FM modulator that is connected inline with my antenna from the Radio. The beauty of the Audiovox is that it blocks any incoming signal from the antenna and feeds its signal into the antenna so the radio provides a great sound just like you were listening to a very strong FM station.



My cell phone, which also plays mp3 music, is my aux music source for those ride into remote areas. Anyway the need thing about my cell is that if I get an incoming call, it stops the music, and automatically goes into phone mode. This combined with a headset mic/earphone gives me hands free communications.



I would like to wire the microphone/speakers from my helmet so that when the cell phone goes into phone mode, I could flip a switch and now the helmet mic provides input to the cell phone and not the intercom. There are some systems out there that do a similar job for the GL1500/GL1800 but not the GL1200.



Any suggestions would be appreciated.

Thanks,



My main goal in life is to slide into home plate, look God in the eye and state "Man what a ride!".
owaace is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 02-26-2010, 10:30 AM
Moderator
 
Bike...and Dennis's Avatar
 
Join Date: Feb 2009
Location: Glendale, Arizona, USA
Model: 1987 GL1200 Interstate 290,000 miles
Posts: 21,635
Post imported post

J&M used to sell phone interfaces.

Why ain't we ridin'?
Bike...and Dennis is online now  
post #3 of 8 (permalink) Old 02-26-2010, 11:51 AM Thread Starter
Junior Member
 
owaace's Avatar
 
Join Date: Jul 2008
Location: Owatonna, Minnesota, USA
Posts: 4
Post imported post

Dennis,



I looked at J&M and they are setup to only support GL1500/GL1800 bikes. Does anybody know if this would work for a GL1200?



I also am looking for a less expensive solution, but if I can find a solution will......



Thanks,

Brian

My main goal in life is to slide into home plate, look God in the eye and state "Man what a ride!".
owaace is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 02-26-2010, 12:11 PM
Moderator
 
Bike...and Dennis's Avatar
 
Join Date: Feb 2009
Location: Glendale, Arizona, USA
Model: 1987 GL1200 Interstate 290,000 miles
Posts: 21,635
Post imported post

owaace wrote:
Quote:
I looked at J&M and they are setup to only support GL1500/GL1800 bikes.
Yeah, GL12s are now considered obsolete by the aftermarket companies.

Why ain't we ridin'?
Bike...and Dennis is online now  
post #5 of 8 (permalink) Old 02-26-2010, 12:18 PM
Senior Member
 
nsjoe's Avatar
 
Join Date: Jan 2009
Location: Wickliffe, Ohio, USA
Year: 2002
Make: Honda
Model: GL1800A
Posts: 1,572
Post imported post

try Kennedy. If they don's have it, they can probably make it.

http://www.cellset.com/motorcycleitems.html

If they don't have what you want, try emailing them:

[email protected]

Joe
Darksider #493

Former bikes:
\'80 CB750 Custom
\'86 GL1200 Interstate

nsjoe is offline  
post #6 of 8 (permalink) Old 02-26-2010, 12:54 PM
Paid Site Sponsor
 
Join Date: Dec 2005
Location: Troy, Oh., The Villages, Fl. USA
Model: 2015GL,2008GL,2000 Valk
Posts: 680
Post imported post

The J&M CFRG-390C is a universal interface and will work on anything that has 12V supply. It is just shown on a 1500 for display purposes. I had one on my 87 ASP.
http://www.sierra-mc.com/proddetail....d=JM-CFRG-390C


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Wayne


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Wayne is offline  
post #7 of 8 (permalink) Old 03-03-2010, 04:11 PM Thread Starter
Junior Member
 
owaace's Avatar
 
Join Date: Jul 2008
Location: Owatonna, Minnesota, USA
Posts: 4
Post imported post

Thanks guys for the commerical options. If any one has a home-made one I would like to hear about that too.



Ride Safe!

My main goal in life is to slide into home plate, look God in the eye and state "Man what a ride!".
owaace is offline  
post #8 of 8 (permalink) Old 03-04-2010, 08:55 AM
Senior Member
 
jwhitmore44's Avatar
 
Join Date: Apr 2006
Location: St. Francis, Kansas, USA
Posts: 2,523
Post imported post

I'll 2nd nsjoe recommendation on Kennedy. i haven't used their stuff but looking over their web site, they probably have the cleanest setup for what you want.

I tired wiring in a hand held CB to my intercom on my 84 aspy. I never could get the mic input to the radio setup correctly. GSMclean had did some playing with this and he has suggestions on matching or filtering transformers. Unless you are real handy with electronics and have access to electronic parts it's not worth the time to try an make a "less expensive" setup. If you want less expensive, go with and earbud set made for your phone and attache the mic piece to your existing boom or the inside chin bar on your helmet.

03 Honda XR650L
84 GL1200 Aspencade

jwhitmore44 is offline  
Closed Thread

  Steve Saunders Goldwing Forums > Forums > Goldwing Technical Forum

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Steve Saunders Goldwing Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
GL1200 audio question jasonpumper Goldwing Technical Forum 9 06-26-2011 09:28 AM
gps audio into stock intercom (1800)? da_bull Goldwing Technical Forum 19 06-22-2011 09:04 AM
GL1200 ASP. AUDIO SCHEMATIC NEEDED emaffia Goldwing Technical Forum 2 03-05-2010 06:51 AM
GL1200 audio solutions... mcdonl Goldwing Technical Forum 8 10-03-2009 07:15 AM
j&m audio 5 pin hook-up cable for the intercom headset legond87 For Sale/Wanted Forum 3 08-22-2008 04:45 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome