Steve Saunders Goldwing Forums

Steve Saunders Goldwing Forums (
-   Goldwing Technical Forum (
-   -   toe and heel shifter (

Daaaon 11-14-2011 08:51 AM

imported post
Just noticed my inherited GL1100 had tape and plastic tie wrap securing toe & heel bracket to shifter, it looks like it is not engaged properly as shifter sits at end of toe & heel bracket opening and activating may disengage ( I cant see ifbent ?).

Since I learned on standard shift how easy is it to convert to this (foot peg)?

If I replace I seen more than 1 floor board parts package, which one would you recommend?


Bike...and Dennis 11-14-2011 09:18 AM

imported post
Hi Daaaon, welcome to the forum.

You should be able to findsome inexpensivestock pegs on ebay pretty easily. That would be the easiest way to get it working. Many don't like the aftermarket boards and shifters. Somesay the heel/toe shifter is hard on the tranny. Also, the boards reduce cornering clearance.

RB 11-14-2011 09:30 AM

imported post
+1 on hard on the tranny if you are not real careful about shifting with the heel..

All times are GMT -5. The time now is 12:47 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.

For the best viewing experience please update your browser to Google Chrome