Steve Saunders Goldwing Forums

Steve Saunders Goldwing Forums (
-   Goldwing Technical Forum (
-   -   clutch repair 1984 gl1200 help (

pbogatko 10-24-2013 09:27 PM

clutch repair 1984 gl1200 help
I'm working on the clutch of a 1984 gl1200. I do not have any pressure at the level and the system was bled at the dealership. It worked for a while after leaving the shop but got progressively worse until now I can not activate the clutch at all. Help

newday777 10-25-2013 06:58 AM

Welcome to the forum pbogatko

Sounds like your clutch slave cylinder is leaking, which is very common from not flushing and bleeding the fluid yearly (same with the brakes) . If so, it is full of gunk and the fluid starts leaking into the engine and eventually outside and will eat the paint off the rear engine case. Flushings will not remove the gunk, only a proper removal and cleaning will remove the gunk in the slave cyl.

newday777 10-25-2013 07:00 AM

Please finish your location, there is more than one

All times are GMT -5. The time now is 04:46 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.

For the best viewing experience please update your browser to Google Chrome