Steve Saunders Goldwing Forums

Steve Saunders Goldwing Forums (https://www.goldwingfacts.com/forums/)
-   Goldwing Technical Forum (https://www.goldwingfacts.com/forums/2-goldwing-technical-forum/)
-   -   GL1200 clutch master cylinder "window" (https://www.goldwingfacts.com/forums/2-goldwing-technical-forum/469106-gl1200-clutch-master-cylinder-window.html)

RATWING-86 11-04-2013 06:50 AM

GL1200 clutch master cylinder "window"
 
Mine was leaking so I tried staking it with a socket (worked on the front brake master) and I broke the window. I read somewhere that someone makes replacements, would any of y'all know?

John

RB 11-04-2013 07:19 AM

Many JB weld a dime in the slot..

tricky 11-04-2013 07:40 AM


tomcox.nc 11-04-2013 02:07 PM

I second that...

I got (2) From www.newrivercyclesalvage.com/.

They worked out great. Just make sure the hole is really clean and apply some clear RTV with a toothpick around the outside edge and don't glob it.

mad4plyn 11-04-2013 07:02 PM

I went to a jeweler and got a piece of glass, a little epoxy (Think JB Weld) and I have had no issues for the last 3 years.

RATWING-86 11-05-2013 09:38 AM

Thanks for your replies, Dublin, VA is a 70 mile road trip from me, sounds like a CBX cruise!


All times are GMT -5. The time now is 03:59 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.

 
For the best viewing experience please update your browser to Google Chrome