Old School Guru
Join Date: Jul 2005
Location: Hensley(Nearer to East End), Arkansas, USA
Model: GL1800 CSC Trike with Navi
I agree just pull the wires out of the bulb socket and reverse the two hot wires..problem solved...or cut wires if you don't want to pull them out of the socket and splice them back in reversed.....OR...do the same at the switch.
Don't do it at the switch, you will still have the highbeam light on the dash coming on(seen this before)(The highbeam indicator is wired into the lead going to the highbeam bulb.)
. Just switch the wires at the bulb. They were wired backwards, that is all.
Present Bikes: 2007 GL1800 CSC Trike with Navi
Loud pipes don't save lives, they just annoy everyone.
A veteran is someone who, at one point in his or her life, wrote a blank check made payable to The "United States of America", for an amount of up to and including their life. (Author unknown)
Proud member of the World Famous Wild Rhinos