Steve Saunders Goldwing Forums - View Single Post - GL 1500 final drive reassembly

View Single Post
post #1 of (permalink) Old 08-01-2008, 04:31 PM Thread Starter
Junior Member
wingannaprayer's Avatar
Join Date: Aug 2007
Location: Winnsboro, South Carolina, USA
Posts: 21
Post imported post

While changing my tires on my '89 GL1500, I decided to lube the splines on my final drive. Removed final drive without a problem. Did the cleaning and lube on driven gear spline and u-joint spline. Went to reinsert drive shaft into u-joint and it just won't go. Splines are good and clean. There doesn't seem to be any blockage, and it should just slide in according to the manual. Has anyone experienced this and how did they remendy? Thanks in advance for you help.
wingannaprayer is offline  
For the best viewing experience please update your browser to Google Chrome