Steve Saunders Goldwing Forums - View Single Post - LED DRIVING LIGHTS OR FOG LIGHTS

View Single Post
post #5 of (permalink) Old 11-13-2008, 01:47 AM
oldishwinger
Senior Member
 
oldishwinger's Avatar
 
Join Date: Jul 2007
Location: Napier, , New Zealand
Posts: 689
Post imported post

gidday,

with a bit of prudence the 1200 will handle extra lighting etc. it pays though, to put them through a relay, this will help take the load off the 1200's electrical system.

also install a switch which will give you more control, should you need it.

for driving lights, from what I have read, 50 watt halogens may be a bit too much,
but 30 watt are fine.

Recently, I installed marker lights, from cyclemax that had 50 watt halogens, but as I was looking more to be seen, than more light at night, I changed the bulbs to led, which give a white light, equivalent to 25 watt halogens each, with a draw rate of 3.6watt per bulb.

boy they are bright, but dont show a lot of light on the road at night, maybe a little, just around the front tire.

the extra draw on my voltmeter, is so small, its not worth mentioning.

good luck,

Robbie,

1986 Gl1200 Aspencade (Mariah)

\'I ride not to get there, but to go\'
oldishwinger is offline  
 
 
For the best viewing experience please update your browser to Google Chrome