Steve Saunders Goldwing Forums - View Single Post - GL1500 vacuum lines

View Single Post
post #9 of (permalink) Old 11-01-2018, 10:13 AM
snowmoer's Avatar
Join Date: Dec 2012
Location: Cedar City UT
Model: 1988 GL 1500, 2012 GL1800, 1977 GL1000 2012 KLR 650
Posts: 367
Originally Posted by tlbranth View Post
Later: I just looked online and there's plenty of metric vacuum hose available in silicone. Anyone us this stuff? Apparently it's superior to rubber.
I used silicone hose when I replaced my hose. No problems. I also replaced the hoses on my carbs while I was at it.

I didn't see bulk vacuum hose from Honda when I did mine. Even asked the dealer. They did have bulk coolant hose and I used that on some of the short straight runs as I replaced my coolant hoses at the same time Like Alex recommends. Most of the coolant hoses have bends in them also. I was able to get most of those hoses from Honda. There were a couple that they did not carry, so I just got the long coolant hoses with the bends in them and just cut it to length.

AMA Life
2012 GL 1800 Level 3
1988 GL 1500
1977 GL 1000
2012 KLR 650
snowmoer is offline  
For the best viewing experience please update your browser to Google Chrome