Steve Saunders Goldwing Forums - View Single Post - 2003 Won't start now

View Single Post
post #17 of (permalink) Old 03-27-2019, 06:34 PM Thread Starter
Bvanemon
Senior Member
 
Bvanemon's Avatar
 
Join Date: May 2009
Location: Columbia City, Indiana, USA
Year: 2003
Model: 2003
Posts: 574
Yes, I did the WD no change went ahead and removed the switch cleaned and lube just dirty no junk. I did put a 22 mm on the nut won't move and it looks to be in the neutral position.
Still just clicks, and looses power when you push the start button all the way.
Pulled the A/B solenoids and ran the books test for each power to the small leads Y/Gr + Br/Rd - it clicks then check for continuity both test fine.
Not sure what direction to go tomorrow, book kinda heads toward checking reverse relays not sure about the reasoning for that unless it has something to with the reverse relay. I had tried to use it while running when all this started.
Again thanks. I'm open to just about anything.
Forgot yes I had the key on when I jumped the B terminal. It did turn over but I didn't want to force it.

Brian&Marn
Bvanemon is offline  
 
 
For the best viewing experience please update your browser to Google Chrome