Steve Saunders Goldwing Forums - View Single Post - 2003 Won't start now

View Single Post
post #41 of (permalink) Old 03-30-2019, 06:42 PM Thread Starter
Senior Member
Bvanemon's Avatar
Join Date: May 2009
Location: Columbia City, Indiana, USA
Year: 2003
Model: 2003
Posts: 574
Yes, I should have posted earlier about the voltage at the cable. I will definitely add a second ground.
I did reinstall the starter, what a pain even after lubing the o-ring, didn't use the bolts once I had it started I installed 1 bolt on top to hold it square a small pry bar and a rubber mallet lightly tapping it slid in.
Hooked it up and it turns over fine now. Like Redwing mentioned I cleaned the ground bolt under the tank, and will add a second.
Dave thanks for the advice about the hose clamps while working on the starter kept finding more clamps I didn't see the first time around.
Tomorrow I will put everything back that I need to start it.

Bvanemon is offline  
For the best viewing experience please update your browser to Google Chrome