Steve Saunders Goldwing Forums

Steve Saunders Goldwing Forums (
-   Feedback for Hondas Goldwing Team (
-   -   side cover pins (

sprayerferlife 10-27-2013 06:15 PM

side cover pins
Anybody have any ideas on how to repair/ fix the pins on the side covers when they break off without replacing the complete cover, thanks

Ken Bergen 10-27-2013 06:40 PM

Welcome to the forum.

On my CB900C I used two part epoxy to re-attach one pin and rode it for another ten years.

Of course you mileage may vary.

Another method often suggested is ABS cement.

Maddogg 10-27-2013 07:56 PM

stud balls
1 Attachment(s)
I use stud balls and JB weld for Plastics. The panels and the pins are ABS so they can be gluesd back on if you still have the pin. Has to be cleaned with sandpaper first. If pin is lost. I use stud balls.

Maddogg 10-27-2013 07:57 PM

glue them
Here is a pic of them glued

Maddogg 10-27-2013 07:58 PM

ok, let's try this again.

All times are GMT -5. The time now is 05:04 AM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.

For the best viewing experience please update your browser to Google Chrome