Lay ups are done & the edges are trimmed & sanded.
Removed the nuts & bolts ready to remove the body.
The mold popped off easy. Washed the green release off & let it sit in the sun for a bit.
However, remember it took me 3 days to start the layup.
The release spray got some shrinkage & wavely. Didn't notice that!
Anyway the gel coat took the new shape & got a lot of dimples.
Look's like some body work on this one, One lite coat of bondo should fit it right up.
I guess I learned don't wait, be ready for a LONG DAY to layup the body
A little hard to see in the last picture.
Will need to mount the trunk in for now so the body don't move when I start to cut the holes to mount the new tail light buckets.
Will put it back into the mold before glassing in the trunk to make sure it's straight.