Steve Saunders Goldwing Forums banner

GL 1500 Front Wheel Noise

2K views 18 replies 8 participants last post by  eastkytriker 
#1 ·
Hello folks. On my 1990 goldwing/motortrike I have a loud chatter noise in the front wheel at slow speed. Break pads almost new, Wheel bearing changed. When you spin the wheel by hand noise is loud but at highway speed not noticeable. If calipers removed and spun by hand noise gone. Speedo drive makes slight noise. Removed cable and lubricated. Thanks in advance
 
#3 ·
Hello folks. On my 1990 goldwing/motortrike I have a loud chatter noise in the front wheel at slow speed. Break pads almost new, Wheel bearing changed. When you spin the wheel by hand noise is loud but at highway speed not noticeable. If calipers removed and spun by hand noise gone. Speedo drive makes slight noise. Removed cable and lubricated. Thanks in advance
Wheel axle needs adjustment in fork leg to maintain minimum clearance as in shop manual.
 
#9 ·
+1... The left brake caliper is probably hitting the Bolts on the brake rotor. Easy fix:


Steps:
1) Loosen Axle bolt.
2) Loosen all (4) pinch bolts.
3) Use (.020") shim to set gap, between left brake caliper (not the pad) and the brake rotor... or just verify Same Gap both sides of left caliper.
4) Tighten (2) pinch bolts on Left side.
5) Tighten Axle Bolt
6) Tighten (2) pinch bolts on Right side
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top