Steve Saunders Goldwing Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Goldwing Technical Forum
    I recently got an 83 gl1100 and it runs fine. The problem is the starter. I have read through all of the posts about fixing it here and on other forums but just haven't had any luck. The issue is that the starter just doesn't have enough torque to spin over the engine for some reason. It is...
  2. Goldwing Technical Forum
    Huge thanks in advance for any and all help. The bike was driven and rode well as of two months ago, it has been in storage since. I recently got it as a gift from my grandmother. New Battery When you try to start it, all that happens is a click in the relay box on the L/H side. I do not hear...
  3. Altered Induction
    Bike has been running choppy/sputtery, spark plugs were black, rode it around and it even idled smooth, got home, parked it, took plugs out and made the discovery, put them back in and now it won’t even fire. My issues are: 1.I don’t know if I’m adjusting air or fuel with the mixture screw/jet...
  4. Goldwing Technical Forum
    Looking for help/Suggestions/directions on a 93 Goldwing. Purchased this bike recently which had been sitting for two years. Told there was a neutral switch problem. Got it home......Put a battery on it. While going over the bike, found a mouse nest on top of the block, below the air filter...
  5. Goldwing Technical Forum
    Just drove her home after purchase sweet 1 hr ride. Now won't start /engage starter w/ push button. Was going to try to disassemble the push button assembly but can't seem to remove it after removing the 2 main allen bolts. Need a manual or something. Help Cecil Help DIW
1-5 of 5 Results