Joined
·
160 Posts
imported post
There is a weep hole in the slave housing like the one in the water pump. You may find your leak there, running down the rear case. Oil can not get into the engine through here. It will most likely be leaking past item 15 as seen in the fiche from Ron Ayers in the above post.
I installed a "speed bleeder P.N. SB8125L" while replacing these seals. In Canada NAPA P.N. 675-1569 for $16.44 / pair. Well worth it, I struggled without them for quite a while, then went parts shopping. They can also be used for your brakes.
These are metric threads, 8mm x 1.25, but you use a 5/16" wrench ... because they're made in U.S.A.
There is a weep hole in the slave housing like the one in the water pump. You may find your leak there, running down the rear case. Oil can not get into the engine through here. It will most likely be leaking past item 15 as seen in the fiche from Ron Ayers in the above post.
I installed a "speed bleeder P.N. SB8125L" while replacing these seals. In Canada NAPA P.N. 675-1569 for $16.44 / pair. Well worth it, I struggled without them for quite a while, then went parts shopping. They can also be used for your brakes.
These are metric threads, 8mm x 1.25, but you use a 5/16" wrench ... because they're made in U.S.A.
