Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
2,295 Posts
Hey Bobboo,

If I recall correctly, I used 3 sizes in mine when I rebuilt my bike last winter. I did not have to use any Honda hoses, not even any of the preformed ones. I replaced them all. I think it ended up being 3 sizes in total… I purchased two sizes in bulk – 10 feet each and then a 2 foot for something else.

I’ll dig out in the garage tonight to see what I used. You will see a bunch of carb pictures if you click my name and search through my past posts.

Tim.
 

·
Premium Member
Joined
·
2,295 Posts
Bobbo,

I am so sorry I totally forgot to look for the NAPA receipts for the VAC line to find their sizes. I just dug them out but the descriptions don’t mention the sizes. So I measured them…

3.2 mm, 4.2 mm and 5.8 mm. Keep in mind it’s hard to measure the I.D. of a rubber hose.

Again… Sorry about that.

Tim.
 

Attachments

·
Premium Member
Joined
·
2,295 Posts
Xamper,

The following pictures should explain themselves.

Make sure the spring you insert in the 180 degree bend is tight. Work it in with silicon lube.

Tim.
 

Attachments

1 - 3 of 3 Posts
Status
Not open for further replies.
Top