Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
2,795 Posts
I just did mine last night, and found a really Easy way to connect it:

Steps:
1) Feed the cable Up through the (1") round guide beneath the headlight, then back Down to the Wheel, then Back Up to the threaded connection on the speedo... Basically, pull all the Excess cable through the guide, so that you can orient the threaded end Vertically --Otherwise it tends to be mis-aligned during that first effort to engage the threads.
2) Thread the end onto the speedo --This is typically the hard part, but now it will be perfectly aligned (to gravity) because all the slack is sitting atop the front wheel.
3) Pull the slack out of the cable (eg Feed excess back through the guide.
4) Attach lower end.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top