Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· killer driller
Joined
·
781 Posts
That 30 or 32 on the side of the caliper is the size of the piston diameter, in mm of course.

Post a wanted ad here, or just be patient and get one from ebay.

Personally, I would just drill and tap the bleeder screw hole for an oversized bleeder.
I agree drill and tap the old bleeder replace it with an over size bleeder or plug it
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top