Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Hey All, Got a issue with getting fluid to the right front brake on my 83 Aspencade. I know it has the linked brake system and the odd thing is that I get some brake pedal in the rear but nothing up front. I removed the master cylinder and cleaned it out real good including the 2 holes. The rear caliper grabs some and releases and the front caliper is a working one off another 83 but nothing happens. I found the compensator/metering union that the rear master is attached too and got fluid out of the line that runs to the front caliper but no fluid up front. This is driving me nuts Ive spent a good amount of time on this with no results. Anyone out there have a similar experience? Any thoughts appreciated. Thanks GF
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #5 ·
1983 Aspy linked brake issue Help!!!

Thanks for the reply RB. I have been bleeding with a Harbor freight version of the Mity Vac. All I can get is some wet air.I will try your suggestion of back feeding the MC. I hope it works. It seems odd to get some rear brake and nothing up front though Thanks again GF
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top