[amccull]

imported post

I'm rebuilding the front left caliper per the manual. I disassembled everything, cleaned all the parts and began re-assembly when I got stumped on installing the dust seals.

The manual says to install the piston seal, intall the piston and then install the dust seal. There isn't enough clearances to install the dust seals after the piston is installed.

I tried to install the dust seals before inserting the piston but it's a very tight fit and I'm afraid to force it an damage the dust seals.

Any help would be appreciated.

 

[amccull]

imported post

Thank you. That worked just fine. There must be a misprint in the manual.