imported post
Do you have the exhaust ? The travel computer ? and the saddlebag skirts
Do you have the exhaust ? The travel computer ? and the saddlebag skirts
1986 GL1200 SEi Parts--------Complete Bike parted out
imported post
I'm parting out a complete 1986 GL1200 SEi---------motor is crap, and every plastic piece has a different color paint.
Let me know. 708.717.2275.
Thanks.
I'm parting out a complete 1986 GL1200 SEi---------motor is crap, and every plastic piece has a different color paint.
Let me know. 708.717.2275.
Thanks.
- Status
- Not open for further replies.
21 - 40 of 41 Posts
imported post
My name is AL I sent you a PM
My name is AL I sent you a PM
imported post
Do you have the chrome preset button for a 86 SEI radio ?
Do you have the chrome preset button for a 86 SEI radio ?
imported post
What shape is the left saddlebag top ?
What shape is the left saddlebag top ?
imported post
IRAQI RAM wrote:
I have a 1984 GL1200 Interstate
When you say missing tabs; is this the same thing that's wrong with mine... the parts that plug into the main frame are broken off? If so, then I can't use it.
Would youknow how to fix them? I can't find an epoxy that seems to work more than a few hours. Any help appreciated.
Just to be clear, I'm looking for the right cover that goes covers the brake fluid, back shocks air hole for inflation, and some big metal tank like thing that could be the gas tank.:bowing:
I'm also looking for a Left Saddle bag cover
andan oddball cover, I don't know what it's called that goes between the handle bars and the right accessory box. It's a little flap that goes over the big hole down into the fork area and sits on a little bit of frame that's exposed. It's attached on the left side of the accessory box, not the handlebars or steering column.
And, the plastic on the left fron fairing that would, I think, hold the air compressor, if it had one. I need both the plastic rectangular cover, and the part that is the bottom most plastic piece near the riders knees. Perhaps pictures would be better, if you have any of those pieces.
Is there a better way to describe this stuff?
IRAQI RAM wrote:
rightside cover(over gastank, needs body work and missing tabs): $40
I have a 1984 GL1200 Interstate
When you say missing tabs; is this the same thing that's wrong with mine... the parts that plug into the main frame are broken off? If so, then I can't use it.
Would youknow how to fix them? I can't find an epoxy that seems to work more than a few hours. Any help appreciated.
Just to be clear, I'm looking for the right cover that goes covers the brake fluid, back shocks air hole for inflation, and some big metal tank like thing that could be the gas tank.:bowing:
I'm also looking for a Left Saddle bag cover
andan oddball cover, I don't know what it's called that goes between the handle bars and the right accessory box. It's a little flap that goes over the big hole down into the fork area and sits on a little bit of frame that's exposed. It's attached on the left side of the accessory box, not the handlebars or steering column.
And, the plastic on the left fron fairing that would, I think, hold the air compressor, if it had one. I need both the plastic rectangular cover, and the part that is the bottom most plastic piece near the riders knees. Perhaps pictures would be better, if you have any of those pieces.
Is there a better way to describe this stuff?
imported post
Chipman wrote:
Got the rightside rubber gap filler (flap). $5
If you're looking for the leftside fairing glove compartment. $10 . (I don't havethe leather pouch cover, so you'll need to get that off fleabay (Saber))...If you need the front leftside part of the fairing (where the autovolume stuff or CB would be, most guys just use a flat piece of sheetmetal to cover up the hole and paint it to match.
The 2 bottom fairing pieces are sold.
Let me knowon PM if you want anything andwe'll hammer out the shipping details there.Thanks
Chipman wrote:
Yep that's what's wrong with these sidecovers too...ABS cement for the tabs. Yeah the plumbing ABS stuff. Use a toothpick on the sidecover where the tabs should be and use that to build up the ABS cement in layers allowing time to dry in between layers. Then sand down to form new tabs....When you say missing tabs; is this the same thing that's wrong with mine... the parts that plug into the main frame are broken off? If so, then I can't use it.
Would youknow how to fix them? I can't find an epoxy that seems to work more than a few hours. Any help appreciated.
Just to be clear, I'm looking for the right cover that goes covers the brake fluid, back shocks air hole for inflation, and some big metal tank like thing that could be the gas tank.:bowing:
I'm also looking for a Left Saddle bag cover
andan oddball cover, I don't know what it's called that goes between the handle bars and the right accessory box. It's a little flap that goes over the big hole down into the fork area and sits on a little bit of frame that's exposed. It's attached on the left side of the accessory box, not the handlebars or steering column.
And, the plastic on the left fron fairing that would, I think, hold the air compressor, if it had one. I need both the plastic rectangular cover, and the part that is the bottom most plastic piece near the riders knees. Perhaps pictures would be better, if you have any of those pieces.
Is there a better way to describe this stuff?
Got the rightside rubber gap filler (flap). $5
If you're looking for the leftside fairing glove compartment. $10 . (I don't havethe leather pouch cover, so you'll need to get that off fleabay (Saber))...If you need the front leftside part of the fairing (where the autovolume stuff or CB would be, most guys just use a flat piece of sheetmetal to cover up the hole and paint it to match.
The 2 bottom fairing pieces are sold.
Let me knowon PM if you want anything andwe'll hammer out the shipping details there.Thanks
imported post
bump
bump
imported post
right side faring pocket locking cover?
right side faring pocket locking cover?
imported post
IraquiRam, do you have the speaker control toggle? Is the boot still in one piece? If so, I would be interested in that.
I would also be interested if you still havea workingstarter for it.
Please let me know, thanks.
IraquiRam, do you have the speaker control toggle? Is the boot still in one piece? If so, I would be interested in that.
I would also be interested if you still havea workingstarter for it.
Please let me know, thanks.
imported post
coachk64 wrote:
not sure where the speaker control toggle would be? So I'm not sure if there was one on this bike.
Starter works good, $50 including shipping.
coachk64 wrote:
hey coach,IraquiRam, do you have the speaker control toggle? Is the boot still in one piece? If so, I would be interested in that.
I would also be interested if you still havea workingstarter for it.
Please let me know, thanks.
not sure where the speaker control toggle would be? So I'm not sure if there was one on this bike.
Starter works good, $50 including shipping.
imported post
Giving myself a bump.
Most of the bike is gone, still have the exhaust and some odds and ends.
$125 on the exhaust, this is the turndown style and includes both headers. Let me know.
Giving myself a bump.
Most of the bike is gone, still have the exhaust and some odds and ends.
$125 on the exhaust, this is the turndown style and includes both headers. Let me know.
imported post
Hi,
do you still have the cb unit?
thanks,
Hi,
do you still have the cb unit?
thanks,
imported post
What kind of shape is the exhaust in ? Rust ,roadrash, Ect
What kind of shape is the exhaust in ? Rust ,roadrash, Ect
imported post
oldishwinger wrote:
Right winger wrote:
Exhaust is solid, has some surface rust of course, but can be wiped off. The leftside cover has battery acid stains on it in the common area. The headers probably have a bit of roadrash on the bottom. If the header rash isan issue for you, I can dig out some pristine headers instead of the rash for an extra $50. Thanks
oldishwinger wrote:
Sorry, it's sold, all I got left from the cb are just the wires. But trucknchuck on this forum has a complete unit for sale. ThanksHi,
do you still have the cb unit?
thanks,
Right winger wrote:
What kind of shape is the exhaust in ? Rust ,roadrash, Ect
Exhaust is solid, has some surface rust of course, but can be wiped off. The leftside cover has battery acid stains on it in the common area. The headers probably have a bit of roadrash on the bottom. If the header rash isan issue for you, I can dig out some pristine headers instead of the rash for an extra $50. Thanks
imported post
How much for the complete trunk lights and all? I ask because I've been kicking around the idea of putting a 1200 trunk on my 1100.
How much for the complete trunk lights and all? I ask because I've been kicking around the idea of putting a 1200 trunk on my 1100.
imported post
Broke Winger wrote:
Sorry but the trunk is long gone.
Broke Winger wrote:
hey T,How much for the complete trunk lights and all? I ask because I've been kicking around the idea of putting a 1200 trunk on my 1100.
Sorry but the trunk is long gone.
imported post
Looking for a Drive shaft
Looking for a Drive shaft
imported post
Do you still have the heal/toe shifter and brake assembly? What kind of shape are they in?
Do you still have the heal/toe shifter and brake assembly? What kind of shape are they in?
21 - 40 of 41 Posts
- Status
- Not open for further replies.
Steve Saunders Goldwing Forums
A forum community dedicated to Honda Gold Wing owners and enthusiasts. Come join the discussion about reviews, performance, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
De Motormuis
536 Replies
Foodman
326 Replies
harveysmedlap
263 Replies
Recommended Communities
