Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
4,212 Posts
ANYTHING electrical that looks OK, usually is not.
Have to take it part to see it's contact points.
That's almost always where the non-connections are.

Sometimes it's where the wire is crimped at the wire connector, it could use a re-crimping. If that's the problem, solder it.

Kill switch, side-stand switch, lean angle switch, clutch switch, neutral switch, relays, fuses and (hopefully not) the ignition switch.

Lots of safety things on our Wings.
GL!
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top