Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Premium Member
Joined
·
168 Posts
Discussion Starter · #1 ·
Ok folks have to replace the seals on my 98 SE. Have the instructions, but what I need help with is what parts do I have to order. I know I need I need some type of fork oil to replace present oil. and a set of fork seals; I am going with ALLSBBALLS fork seals? Are there any other parts I need to purchase before I tear down my bike. Seems like and easy process? Thanks for all your help. Also noticed on a few parts online shops there is an 1500 se A and AC. What is the difference?
 

·
Senior Member
Joined
·
1,820 Posts
I would use oem Honda seals , (but i dont now to much about AllBalls ).
For the fork oil go for weigth 15 , - in my opinion the rigth for an 1500.
If nothing else is worn out , (but hard to tell before disassemle), - thats what you need .
 

·
Premium Member
Joined
·
530 Posts
I got the All Balls kit that has the Seals,Dust Seals, Slider bushings [4] and retainer rings.It would be a good idea to change the slider bushing while your in there.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top