Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
2000 GL1500SE
Joined
·
3,360 Posts
Here is a link to a thread on how to change the fork oil through the air caps at the top of the forks. Just jack the front wheel off the ground and remove the drain plug at bottom of fork. To refill just remove the air cap and valve core and put fluid back in through there. Quick and easy... no need to remove the forks or fork cap to do the job.
Note: For the 95 and up models the fluid level is wrong. It was corrected in a later thread. Here is the corrected amounts for the late model 1500s.
14.0" for 95-up (progressive springs installed tight end down)
14.2" for 95-up (progressive springs installed loose end down)
14.3" for 95-up (OEM springs installed)


http://www.goldwingfacts.com/forums...-oil-changing-method-getting-level-right.html
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top