Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
224 Posts
The goldwing tanks have 2 pick ups in the bottom of the tank with kind of a screen over them. Most of the time when you use sealer you will clog up these screens. This is what happened when I sealed one on a '75 way back. I ended up taking a screwdriver and opening up the pick area after sealing the tank. I would 1st blow air in the tubes to make sure that the lines are not clogged shut before sealing the tank. Not sure if blowing a small amount of air in the tank when the sealer is applied is a good idea to keep the screens open. Just thinking out loud. Best of luck with the tanks.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top