Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 3 Posts

· Premium Member
Joined
·
294 Posts
imported post

This is for my 83 Aspy but it should be the same for you:

To work on the speakers and the mirrors (and a bunch of other things as well) you need to take off the front signal lights. Then you should be able to see four brass wing nuts which hold on the speaker enclosures. Depending upon what electronic equipment is installed there are up to 9 fuses accessible through the left signal light opening.

If you buy new speakers check the mounting depth. About 2 1/4" is the max. Many on this site replace the OEM's with 4" two-way speakers from Wal-Mart

I bought my antenna from eBay. Different years have different rear mounts so it's wise to check. And various suppliers also sell antenna parts. Do a search on eBay and on this site..

If you add a CB the advice on this site is that the combo antenna works better than two singles.

The mirrors should come off when you remove the two mounting screws. They use special nuts on the inside of the faring which sometimes turn in their bases so you may need a wrench to loosen/tighten them. There is a screw in the lower part of the arm which can be (carefully) tightened. If it's the mirror head that's loose you may need to take it to a glass shop. Do a search on this site. Again, they're also available on eBay but I haven't heard anything good about them
 
1 - 1 of 3 Posts
Status
Not open for further replies.
Top