Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
68 Posts
Discussion Starter #1
imported post

81 GL 1100....I took the rear caliper off and it is missing a couple of parts.One is the spring pad in top of caliper and one of the small clips I don't know what it's called or what it's for.It's a small clip that has two tiney holes and has a cut out in it.Any suggestions would be greatly appreciated.Thanks!

Bobby
 

·
Official "Cheeky Plonker"
Joined
·
1,211 Posts

·
Premium Member
Joined
·
68 Posts
Discussion Starter #3
imported post

Chilidawg....It's a single piston caliper.I also have a 82 parts bike that has the double pistons....but they are still on the bike.I would have to pull all the wheels off both bikes and change out the calipers'the 82 calipers are wider and pad path is narrower.these 2 parts I need,I think the pad spring may still be availble...but not the little clip.Thanks!

Bobby
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top