Joined
·
35,721 Posts
imported post
Okay Coot, here's the measurements from my 1100 manual:
Top and Second Ring End Gap:
Standard: 0.004 - 0.012" Service limit" 0.02"
Oil Ring Side Rail End Gap:
Standard:0.008 - 0.035" Service limit: 0.04"
Top ring is chamfered on top and bottom edges with a bevel, widest edge down.
Second ring has a 30 degree bevel with the widest edge down.
Markings on the rings go toward the top of the piston as per normal practice.
Okay Coot, here's the measurements from my 1100 manual:
Top and Second Ring End Gap:
Standard: 0.004 - 0.012" Service limit" 0.02"
Oil Ring Side Rail End Gap:
Standard:0.008 - 0.035" Service limit: 0.04"
Top ring is chamfered on top and bottom edges with a bevel, widest edge down.
Second ring has a 30 degree bevel with the widest edge down.
Markings on the rings go toward the top of the piston as per normal practice.
