Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Guru
Joined
·
3,074 Posts
imported post

Confirm that your plug wires are not mixed up. Try to open the carb bleader screws one at a time & ensure that all 4 bowls have clean fuel in them. Kill switch to run & if you need to, boost from a non running car or truck. Do not crank excessivly or you will cook your starter. Plug gaps should be around 30. Once it starts do not rev it up alot. It needs time to loosen up & lubricate.

Keep us posted!
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top