[maplewingnut]

I am back working on my '82 project bike. She's going naked.
Any suggestions on how to tidy up the mess of wires at the front end?

 

[Silicon Sam]

Shove them in the back of the headlight bucket.

 

[Ansimp]

Big headlight bucket! Try and move wires back behind the frame stem as much as possible.

 

[DaveO430]

They all go tidily inside the headlight bucket, if you have the original type which is the same as the bigger CB models there are places inside for the connectors.

 

[maplewingnut]

Thanks guys for the input.
I think I am going to need to get a bigger headlight bucket.
My mantra for getting this project on the road is 'work with what I've got. Make it perfect later'

 

[RKB53]

Save what you need and get rid of the rest.

 

[bobarama]

I think it might be a sin to do this.

I don't know if I'll be able to sleep tonight.

Just kidding!!!!!!!!!!!!!!!!!!!!!

 

[Vitamin G]

I went the opposite route of turning my standard (naked) 1980 goldwing into an interstate (without the front fairing). Wires fit into the headlight quite nicely.

 

[billeditman]

in making this transformation was there wires that had to be hooked up after you took off the fairing. I<m working an 81, took off the fairing and now I seem to have a dead electrical system. I,m wondering if something has to be hooked back up differently. any suggestions.