[jackjohn]

imported post

Hi TomCs, Welcome to the best GoldWing board on the internet. RedWing will be along soon to give you the official welcome. Do you have the Clarion Model II radio on your bike? If so, I can send you the complete installation instructions and wiring layout. I will say that on the Clarion II, there should be a "Y" cable with a din connector on all three ends. Two are plain and one has a white band around it. That one plugs into the ALC-Amplifier and the two head sets plug into the others. I would attach a pic of the Radio controller but I can't get any of my pics down to 100K.

 

[jackjohn]

imported post

Thanks Exavid.

 

[jackjohn]

imported post

TomCs, where is the radio station/clock display? On a model I, it is on the control head near the top. On the model II, it is in the center pod between the speakers.

 

[jackjohn]

imported post

Hi SalPal and welcome to the best GoldWing forum on the Internet. On your wiring issue, the yellow band indicates Intercom and that should be plugged into the intercom (top) receptacle on the component terminal. The component terminal is accessed through the left turn signal hole. The purple band indicates CB and that should be plugged into the CB Module. This is accessed through the right turn signal hole. If you need any other help, just ask, someone here will be able to provide it. Keep us informed on your project.