[Bigbooy]

imported post

Trying to revive my 84 aspencade, been looking for an exhaust on ebay but I'm in a hurry. Any suggestions on where to find them?

 

[Goldwinger1984]

imported post

Try http://www.jcwhitney.com .

Vic

 

[exavid]

imported post

Bigbooy,

:waving::waving:Welcome to the Best Goldwing Website on the Internet!:waving::waving:

:jumper::15red::jumper:

 

[Bigbooy]

imported post

Thanks for the welcome and tip on JC Whitney. They don't have much for Goldwing Exhaust that I can Find. I found turned down tips for an 1800, But I need it all from the ports to the tail. Will keep looking. One good thing is my search brought me to this site. Hopefully I will get it running and see everyone in Americade.

 

[dean_3326]

imported post

Bigbooy wrote:

Trying to revive my 84 aspencade, been looking for an exhaust on ebay but I'm in a hurry. Any suggestions on where to find them?

Bigbooy,

You might try these sites for parts.

[url]http://www.damagedbikes.com/goldwing.htm[/url]



[url]http://goldwing-parts.domain4auction.com/[/url]


[url]http://www.oldbikebarn.com/motorcycles/?bike=GL1200[/url]

[url]http://stores.ebay.com/Whiteys-Goldwing-and-Honda-parts_GL1200-GL-1200_W0QQcolZ4QQdirZ1QQftidZ2QQpZ2QQtZkm[/url]

[url]http://stores.ebay.com/Puget-Sound-Motorcycles_W0QQssPageNameZVIStoreHeaderLinksQQtZkm[/url]?

dean_3326 :12red::12red::12red::12red::12red::12red:

 

[Goldwinger1984]

imported post

Bigbooy, if you're in a big hurry you can remove the manifold and take them to a muffler shop and have the rusted ends cut off,then have a new end welded on.

Then you can find some stockHarley take offmufflers, which are quite common, and use those until you find a decent original system.

I have seen some stock, original, used exhaust systems go on Ebay for $700. U.S.

Seems like a lot of money to me.

Vic

 

[JOHNO]

imported post

where are you?

 

[exavid]

imported post

Bigbooy wrote:

Trying to revive my 84 aspencade, been looking for an exhaust on ebay but I'm in a hurry. Any suggestions on where to find them?

I don't know where you're located, but if you are interested in the pipes at Puget Sound Motorcycle, they are near me and I could go take a look for you.

 

[OH2FL]

imported post

Good Resources Dean.

Thanks ~ with this I was able to find the battery cover I lost at a fraction of the cost. :clapper:



Mike in Ohio