[Rodd]

Anyone out there still doing this as a service. I know, I can do it myself.... but, to be honest that’s a job I am not really all that good with. Plus I hate working on those.

Thanks,

Rodd

 

[Bike...and Dennis]

There are a few. Looked on Randakk's site, but only found this.

Randakk's Approved Carb Rebuilder Program | Randakk's Blog

If you would prefer to have a "pro" rebuild your carbs, here's the answer. You can now have a professional rebuild your carbs via a Randakk's Approved Honda GL1000 / GL1100 / GL1200/ GL1500 / CBX/ CX500/ DOHC-4 Carb Rebuilder. You can trust your carbs to any of these folks as I have rigorously...

www.randakksblog.com

You may be better off going to a GWRRA meeting and asking the locals.

 

[DaveO430]

1200 carbs are the simplest of all the carbed goldwings. Take your time and check everything twice and save some money, unless you have more than you need.

 

[AZgl1800]

thread I created: Where can I get my Carbs Overhauled?

Barret Bear Steck
Repair and Restoration of bikes
Carb overhauls

https://www.facebook.com/Longhairbear/photos?lst=100003595737270%3A100002625037918%3A1584030107

Madison, WI
6082149803

 

[Dirt Road Cowboy]

I sent mine to Pistol Pete's son Mark last year, and he did a great job.

He uses the same email as Pistol Pete:

[email protected]

 

[dusterdude]

Drc,if you don't mind saying.how much did he charge?

Sent from my LM-X420 using Tapatalk

 

[CWN]

Can't beat Mike Nixon for his expertise.

Welcome to The Motorcycle Project!

 

[AZgl1800]

this is a good guy to use also:
-----------------------------------


thread I created: Where can I get my Carbs Overhauled?

Barret Bear Steck
Repair and Restoration of bikes
Carb overhauls

https://www.facebook.com/Longhairbear/photos?lst=100003595737270%3A100002625037918%3A1584030107

Madison, WI
6082149803

,
Bear's Cycle & Restoration
N1639 Brunkow rd
Juda, WI 53550
608-214-9803
[email protected]

Bear's Cycle & Restoration

Bear's Cycle & Restoration. 394 likes · 28 talking about this. Full service motorcycle repair and restoration. Specializing in Japanese, vintage, and especially Honda Goldwing. Carburetor...

www.facebook.com

1975 - 2000
I do many Goldwing carbs, which allows me to charge less and provide the most consistent results. The prices below include all expected replacement parts and return shipping. Turnaround is generally 1-2 weeks.

• Complete disassembly, no shortcuts
• Ultrasonic cleaning
• Randakk's overhaul parts
• Replacement of felt shaft seals
• Polishing of slides, caps, and bores
• Proper mods for better performance
• Wet tested, bench-synched, and set to factory base settings, securely packaged and shipped

GL1000 $450
GL1100 $500
GL1200 $400
GL1500 $350

I have spare carbs for hard parts if necessary. Additional services can include soda blasting, external polishing of caps, replacement of rubber CV diaphragms, and new Honda float valves.

 

[CWN]

after the rebuild www.motorcycleproject.com

 

[Dirt Road Cowboy]

Drc,if you don't mind saying.how much did he charge?

Sent from my LM-X420 using Tapatalk

dusterdude, I had mine done last year, and I think he was running what he called a "Standard Rebuild Special" for $300 + shipping. I don't know what he's charging now, so it would be better to email him directly.

[email protected]

He also has a Facebook page, but I don't do FB.

 

[dusterdude]

Cool,thanks

Sent from my LM-X420 using Tapatalk

 

[ceasefire49]

I bought the Randakk kit and a local guy did it for me for 200 just got them back