Joined
·
9 Posts
imported post
Hi, in the Honda Service Manual 1984 - 1987 in the ignition section it says:
"Inspection
Remove the left side cover and disconnect the pulse generator coupler.
Measure resistance: White/yellow and yellow leads (1-2 cylinders), White/blue and blue leads (3-4 cylinders).
Resistance: 1200 +/- 100Ohms at 20 C (68 F)"
"Air Gap Check
Inspect the air gap between the pulse generator rotot and pickup.
Air Gap: 0.40--0.90 mm (0.016--0.035 in)
Install the pulse generator cover.
'84: Install the swing arm (see page 12-34).
After '84: Install the timing covers."
Hope this might help.
Hi, in the Honda Service Manual 1984 - 1987 in the ignition section it says:
"Inspection
Remove the left side cover and disconnect the pulse generator coupler.
Measure resistance: White/yellow and yellow leads (1-2 cylinders), White/blue and blue leads (3-4 cylinders).
Resistance: 1200 +/- 100Ohms at 20 C (68 F)"
"Air Gap Check
Inspect the air gap between the pulse generator rotot and pickup.
Air Gap: 0.40--0.90 mm (0.016--0.035 in)
Install the pulse generator cover.
'84: Install the swing arm (see page 12-34).
After '84: Install the timing covers."
Hope this might help.
