Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
33 Posts
Discussion Starter #1
imported post

Hi what would be the max fuel pressure to use on a 85 interstate when using a aftermarket fuel pump.
I have seen ranges from 1.5- 4.5 lbs on some and others 3-5 lbs what is best don't want to due any damage to carb internals or over power the floats
thanks
 

·
Premium Member
Joined
·
5,734 Posts
imported post

there is a suggestion in the tech post section. tech post is in the right menu on the front page. click on it an go to f , click on it and go to fuel pump replacement 1200 , hope this helps.
 

·
Premium Member
Joined
·
54 Posts
imported post

I just had a pump failure on my 84 Interstate, I went with the aftermarket as well, Bestest Fuel Pump I think the psi on it was 2.5-4.5 w flow rate of 30 GPH i believe the OEM pushes about the same psi with only 20 GPH. I've actually had greater response with the aftermarket and the pump fit in the existing mount only diff. was the outlet side of the pump was on the oppposite end of the pump from the OEM if that makes sense. I just covered the fuel line with the Braided Steel Cover looks better than stock. :cool:
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top