Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Premium Member
Joined
·
2 Posts
Discussion Starter · #1 ·
imported post

Hi All:



I would like to know where the Ziener Diode is on my 86 Interstate?

Being an old disabled tool and die maker isn't bad when you find a site like this one.

I have found that information saves time and a lot of pain.



I read through most of the posted info. for my problem and the Ziener might

be what I need, the system still charges to 13.6 volts even with one highvoltage

lead off. --At 3000rpms that is.

I started working with autos at my dads shop in 1950 at the tender age of 6,

so I'm fairly knowledgeable with all things mechanical.





Thanks Everyone, Fran
 

·
Premium Member
Joined
·
298 Posts
imported post

The only zener diode I am aware of is the one in the voltage regulator/rectifier. The VR is located under the false tank on the left side.

Is one of your stator leads burnt? You may want to do a search for posts about the three yellow wires and how most folks have fixed these problem wires.

Oh, by the way, welcome to the site!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top