Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
41 Posts
Discussion Starter #1
imported post

Hello

My bike won't start in gear with the clutch pulled in(lets say in first gear)-it will only start in neutral.Would that likely be the clutch switch-my cruise works fine as it should-touch the lever and it will kick off.

Thanks for any ideas.

Doug
 

·
Monkey with a Football
Joined
·
19,237 Posts
imported post

Clean or replace your clutch switches if the lever bearing and bushing aren't worn and if you are using a stock pivot bolt and stock lever.
 

·
Premium Member
Joined
·
1,020 Posts
imported post

Also the side stand must be up for the bike to start in gear with the clutch pulled.
 

·
Postpubescent member
Joined
·
36,382 Posts
imported post

Which means the side stand switch needs to be checked as well as the clutch switch.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top