Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Premium Member
Joined
·
292 Posts
Discussion Starter · #1 ·
How do the cables come out of the housing, the metal elbows are screwed into the housing and appears on replacements the elbow comes with....I understand the carb. end but the throttle end is confusing...many thanks
 

·
Still Learning
Joined
·
13,274 Posts

·
Premium Member
Joined
·
292 Posts
Discussion Starter · #3 ·
Thanks for the link I couldnt find...I guess Im thick didnt see the answer to my question but having never done any throttle work Im gonna take a wild guess and figger the elbow is a jam type situation with tension created by the cable in the sleeve and the locking ring.....
 

·
Still Learning
Joined
·
13,274 Posts
Basically just loosen the nut then turn the elbow out after disconnecting below and on the throttle sleeve ends
 

·
Premium Member
Joined
·
292 Posts
Discussion Starter · #5 ·
Basically just loosen the nut then turn the elbow out after disconnecting below and on the throttle sleeve ends
Many,many thanks.......
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top