Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
123 Posts
Discussion Starter #1
imported post

The size that came with the bike is much smaller in heigth, yet Iam being told that this is the one for the 83 honda aspencade....I took the rubber gaskett off and managed to make it work but the fit is still not completely sealed. What effect doe's this have on the carbs ?? I noticed when I put all the content to the air breather back in place it was one hell of a tight fit with all the wires and cables running along the sides.
 

·
Premium Member
Joined
·
695 Posts
imported post

You'll have to get the one that fits your bike.

If you take any gaskets out to make it fit then it won't seal out dust/dirt which will screw your engine.
 

·
Premium Member
Joined
·
156 Posts
imported post

As Cycleman says, get the right one or you will have no protection what so ever from road dirt , grit,sand, and all the other nasty stuff that will absolutely kill the motor.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top