Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Premium Member
Joined
·
8 Posts
Discussion Starter #1
imported post

Hello All again,

So the small arrows on the Cam gear are supposed to align with the marks on the outside cover and the up is pointed UP, correct?

What is that I read about 9:00 and 3:00?

Thanks again,

Rick
 

·
Postpubescent member
Joined
·
36,382 Posts
imported post

Momboy007 wrote:
Hello All again,
So the small arrows on the Cam gear are supposed to align with the marks on the outside cover and the up is pointed UP, correct?
What is that I read about 9:00 and 3:00?
Thanks again, Rick
Yes, the UPs should be right side up and at the 9 and 3 o'clock positions.
 

·
Premium Member
Joined
·
8 Posts
Discussion Starter #3
imported post

Hello Again,

When you say 9 and 3 oclock, what do you mean by this, I used the very small arrow pointing at the mark on the outside housing of the Cam gear.

Did I mess it up?

Thanks,

Rick
 

·
Premium Member
Joined
·
626 Posts
imported post

Paul is referring to the word "up" on the pulleys pointing to up, the arrows point to the case like you said.
 

·
The Irish Crew
Joined
·
3,932 Posts
imported post

You are doing it the right way Rick. Some models don't have the UP stamped on the pulleys, just the arrows. :waving:
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top